Electrical > Daily > Batteries - Check that batteries are charged or charging properly.
|
Electrical > Periodic > Batteries - Every 50 operating hours or every 2 weeks, whichever comes first: Check electrolyte levels and make sure connections are clean and tight; Be sure tie downs are fastened securely; Check periodically for any cracks or breaks in the case or cover and any cracks in the sealing compound; Check that all battery cells keep an even fluid level and that the fluid is about 3/8" above the top of the separators; Keep battery connections clean and tight
|
Electrical > Periodic > GFCI Outlets - Ground Fault Interrupter Circuit should be tested regularly (by pushing the TEST/RESET buttons).
|
Electrical > Periodic > Shaft Zinc - Inspect shaft zinc periodically and replace as needed. Use Camp ZPC-1, ZPC-2 or ZPC-3.
|
Electrical > Seasonal > Connections - Inspect and coat electrical system connections, battery tie downs and terminal connectors to prevent corrosion; Check all connections at least once a year for corrosion, loose fittings, etc.
|
|